IGUS | energy chains

837 E6.29 E6.29.100. R .0 T3.29 T3.29.100. R .0 E61.29 E61.29.100. R .0 0.1 0.2 0.3 0.4 0.5 0.6 0.8 0.9 10 0.7 E6.29 E61.29 E6.29 E61.29 10 20 30 40 50 1m/s 1m/s 2m/s 2m/s E6.1 | Further advantages 3DCAD, configurators, service life calculation andmore www.igus.eu/E6.1 Noise level dB(A) Weight [kg/m] The results of the E61.29 series noise-measurement tests in the igus ® test laboratory showed noise levels below the already very low values for the E6.29 series. 32dB(A) - level determined at the igus ® test-lab, v = 1.0m/s unsupported, seriesE61.29.070.055.0 The E6.1 generation can take up higher accelerations, due to a weight reduction, making it a highly dynamic yet still extremely quiet e-chain ® Noise level Weight reduction System E6.1 tests in the igus ® lab IPA Qualification Certificate 2) - Report IG 1303-640-1: ISO Class 1, according to DIN EN ISO 14644-1 for system E6.1, series E61.29.50.075.0 at v = 0.5m/s, 1m/s, 2m/s Cleanroom qualification of igus ® system E6.1 e-chains ® By usinga special material, the already lowabrasionbehaviour of the e-chain ® can be reduced even further. Inmany applications where cumbersome special solutions are required, a simple standard e-chain ® can be used instead. IPA tests confirm that the standard e-chains ® from igus ® meet the requirements in cleanrooms and have been "Tested and certified as very good!". Cleanroom applications demand very high wear resistance of moving parts. e-chains ® , for example, must be very wear- resistant, in order to meet the normal requirements for such a sensitive environment. Further information about igus ® cleanroom e-chains ® and the new, unique igus ® cleanroom laboratory for IPA cleanroom Class 1 components From page 145