IGUS | energy chains

143 hi [mm] Bi [mm] zipper 07 09 hi [mm] Bi [mm] E2.1 micro E2C.10 E2C.15 hi [mm] Bi [mm] E2/000 1500 2500 2700 E4.1 E4.21 E4.28 E4.32 E4.42 E4.56 E4.80 E4/light 14240 15050 triflex ® R TRC.40 TRC.60 TRC.70 The igus ® ESD/ATEX e-chains ® available from stock are shown online at X www.igus.eu/esd or orderaseparatecatalogue ESD e-chains ® | Technical environment 1. General safety information These additional operating instructions apply to our ESD e-chains ® in colour grey (similar to RAL 7015). They supplement the installation instructions for the standard e-chains ® and the catalogue information. The information in these instructions relates only to data regarding ESD areas. The technical information in the installation instructions for standard e-chains ® and the category information still apply unless these instructions explicitly exclude or replace the relevant information. 2. Assembly, removal and installation Please follow the information in the installation instructions for the standard e-chains ® and the catalogue information on assembly, removal and installation for trouble-free operation. igus ® ESD e-chains ® must be grounded with appropriate measures in accordance with drawing number 18392 in order to discharge any occurring electrostatic. Assembly, installation, commissioning and maintenance may be performed only by personnel properly trained in explosion protection! Please also note the corresponding national safety regulations and the relevant national regulations in respect of explosion protection during installation and operation. 3. Initial operation Before commissioning the system, check that the system has been installed correctly in accordance with the installation instructions for the standard e-chains ® and the catalogue information. Correct grounding must be checked in particular in the case of ESD e-chains ® . 4. Maintenance igus ® e-chains ® require very low maintenance. Correct grounding of the ESD e-chains ® must be inspected at regular intervals. In case of large projects a customised maintenance plans can become an issue and will be created if necessary. 3DCAD, configurators, service life calculation andmore X www.igus.eu Part No. ESD More information 10.3 10 - 50 X www.igus.eu/07_ESD 15 16 - 50 X wwwigus.eu/09_ESD Part No. ESD More information 10.6 16 - 30 X www.igus.eu/E2C.10_ESD 14.9 16 - 30 X www.igus.eu/E2C.15_ESD Part No. ESD More information 21 15 - 80 X www.igus.eu/1500_ESD 25 25 - 125 X www.igus.eu/2500_ESD 35 50 - 125 X www.igus.eu/2700_ESD 21 30 - 80 X www.igus.eu/E4.21_ESD 28 40 - 125 X www.igus.eu/E4.28_ESD 32 50 - 200 X www.igus.eu/E4.32_ESD 42 50 - 200 X www.igus.eu/E4.42_ESD 56 75 - 300 X www.igus.eu/E4.56_ESD 80 75 - 300 X www.igus.eu/E4.80_ESD 62 50 - 200 X www.igus.eu/14240_ESD 80 75 - 300 X www.igus.eu/15050_ESD 15/13 15 / 13 X www.igus.eu/TRC_ESD 22.5/19.5 22.5/19.5 X www.igus.eu/TRC_ESD 28/24 28 / 24 X www.igus.eu/TRC_ESD Available from stock. Ready to ship in 72hrs.* *Average time before the ordered goods are dispatched. igus.esd. ...ESDe-chains ® ...productrange...24hrs,fromstock...08/2020 e-chains ® ® Table of ESD e-chains ® available from stock