IGUS | energy chains

1224 415 450. Bi .S 430 490.27 56.6.1 5 56 min.40/16 2 12 27 405 415 4 22.5 56.6 56.6.1 9 18 9 18 429 430 9 27 9 489.27 490.27 4040HD 8840HD More information www.igus.eu/4040HD www.igus.eu/8840HD Roller crossbars - increase the service life of cables and hoses ● Significantly reduce jacket abrasionof very sti ff cables andhoseswith rollingcontact surfaces equipped with tribo-optimised bearings ● For sensitive hoses in restricted space ● Usable along the inner and/or outer radius, retrofit possible More information www.igus.eu/roller-crossbar E4/4HD | Series 4040HD | Accessories More interior separation options | Only for e-chains ® Note : Please be aware of the minimum lateral gap to the side links! e-tube: 40mm | e-chain ® : 16mm As standard separators are fitted every 2 nd e-chain ® link! Notch lockingseparator* for increasedholding force Notch locking separators o ff er higher crossbar opening forces for high humidity and/or large hydraulic hoses. They can be positioned precisely and then locked in position. Partial height separator* In conjunctionwith an additional opening crossbar, part no. 450. Bi .S , it provides the option to separate the upper and lower halves of the e-chain ® independently of each other. Rollclip* Minimises abrasion of sensitive hoses. Simply clamps onto the opening crossbar. The movable rollers compensate for relative movement between the e-chain ® and hose. Roller separator* The roller separator is used in a similar way to the rollclip. It is used like a separator. For rigid cables and hoses. *Only suitable for e-chains ® Rollclip*, for e-chains ® unassembled assembled Partial height separator*, for e-chains ® unassembled assembled Notch locking separator*, lockable for e-chains ® unassembled assembled Roller separator*, for e-chains ® unassembled assembled